Full mobile marine service menu

Mobile Marine Services Across Charlotte & Sarasota County, FL

Outboard repair, marine engine diagnostics, scheduled hour service, boat electrical work, trolling motor installs, fiberglass and gelcoat repair, detailing, upholstery work, accessory installation, hurricane prep, and jack plate installation delivered directly to your boat.

Call (239) 333-6722 Book a Service

Established 2016
Mobile Service
All Major Brands
Owner-Operated
Free Estimates

Full-Scope Mobile Marine Service Across the Region

S&S Marine Repair handles the full range of mobile marine services needed by boat owners across Charlotte and Sarasota County. Whether you need routine scheduled maintenance, emergency repair, cosmetic work, or a full accessory or electronics upgrade, we handle the work on-site at your dock, boat lift, marina slip, or driveway. Owner and technician Spencer Iannuzzi runs the operation personally from our North Port base, using manufacturer-level diagnostic tools, OEM parts, and marine industry-standard procedures on every job.

Below is our complete service menu. Every service on this page is available throughout the Charlotte and Sarasota County service area. Click through to any service page for full details on what that specific service covers, common issues we address, our process, and location coverage.

Engine and Mechanical Services

Outboard Motor and Engine Repair

Full outboard mechanical repair covering every major brand and horsepower range. Fuel system service, ignition and cooling repair, water pump work, powerhead diagnostics, lower unit service, and trim system repair.

Learn More

Marine Engine Diagnostics

Manufacturer-level ECM scanning, live-data checks, and symptom-to-root-cause troubleshooting on modern outboards. Written diagnostic reports for every visit. We identify the fault before recommending any parts replacement.

Learn More

Scheduled Hour Service (20/100/300/500/1,000-Hour)

Manufacturer-spec interval maintenance for outboards using OEM fluids and filters. The single biggest factor in outboard longevity, delivered on schedule at your boat.

Learn More

Jack Plate Installation

Manual and hydraulic jack plate installation with proper transom mounting, control cable rerouting, and on-water sea-trial calibration. Popular upgrade for flats and bay boats.

Learn More

Electrical and Rigging Services

Boat Electrical Service

Battery installs, wiring troubleshooting, bilge pump repair, marine lighting, gauge and instrument work, ignition service, and complete boat rewires using marine-grade tinned wire and ABYC-standard installation practices.

Learn More

Trolling Motor Installation and Repair

New Minn Kota and Rhodan trolling motor installs with proper wire gauge sizing and battery configuration. Full repair on existing units including steering, foot pedals, control heads, and GPS anchor systems.

Learn More

Boat Accessories and Upgrades

Chartplotter installs (Garmin, Humminbird, Lowrance, Simrad), marine stereo systems, VHF radios, LED lighting, Power-Pole shallow water anchoring, live-well systems, and full rigging accessory work.

Learn More

Hull, Cosmetic, and Seasonal Services

Fiberglass and Gelcoat Repair

Hull damage repair, gelcoat blending, spider crack repair, and cosmetic restoration work handled mobile at your boat. Post-storm damage and general wear repair.

Learn More

Boat Detailing

Wash and wax service, oxidation removal, hull cleaning, and full detail packages for boats coming out of storage or preparing for peak season or sale.

Learn More

Upholstery and Canvas Repair

Marine upholstery replacement, seat cushion repair, Bimini top and canvas enclosure work using marine-grade materials appropriate to Gulf-Coast sun and salt exposure.

Learn More

Hurricane Prep

Pre-storm inspection, tie-down work, canvas and electronics removal, battery disconnect, engine prep, and post-storm engine restart with damage assessment throughout hurricane season.

Learn More

Why Choose S&S Marine Repair

Owner-operated. Owner and technician Spencer Iannuzzi handles every service call personally. The person who quotes the work is the same person who arrives at your boat and completes the job. No service writers, no rotating techs, no shop overhead added to invoices.

Manufacturer-level tools. We use the same brand-specific diagnostic software that authorized dealerships use for Yamaha (YDS), Mercury, Suzuki, Honda Marine, Tohatsu, and marine electronics brands including Garmin, Humminbird, Lowrance, and Simrad.

OEM parts, no substitution on critical items. We use manufacturer-specified fluids, OEM filters, and OEM wear parts to preserve warranty coverage and long engine life. Where OEM-equivalent quality parts make sense, we say so upfront.

Mobile service throughout Charlotte and Sarasota County. No trailer trips to a shop. No shop queues. Service happens at your dock, lift, or driveway with same-day availability whenever the calendar allows.

Free estimates and honest recommendations. We diagnose properly before spending money on parts, and we give honest repair-versus-replace recommendations based on economic sense rather than what pads the invoice.

Common Questions About Our Services

How do I know which service I need?

Start with a phone call to (239) 333-6722. Describe what the boat is doing (or not doing), what maintenance you have or have not done recently, and any current warning signs. We help you identify the appropriate service category, quote what we can up front, and schedule the visit. For routine scheduled service, the interval is defined by running hours. For repair work, the specific service depends on the symptom and root cause.

Can multiple services happen on the same visit?

Yes, and this is often the most efficient approach. If your boat needs scheduled maintenance plus a repair plus an accessory install, we can often combine everything into a single visit if scope allows. Combining service categories on the same visit saves time and travel and typically produces a better price than scheduling each separately. When you call, list everything you might need done and we plan accordingly.

What if I need a service that is not listed here?

Call (239) 333-6722 to discuss. Our regular service scope covers the categories listed above, but marine work is broad enough that specific requests sometimes fall outside standard categories or require coordination with other specialists. For work outside our regular scope, we can typically refer you to trusted providers who handle the specific need. Our goal is to get your boat serviced properly, whether that means we do the work or we point you in the right direction.

Do you handle warranty work on newer engines?

For engines still under manufacturer warranty, warranty repairs need to go through an authorized dealer to keep the warranty valid. We can help diagnose the issue independently so you know exactly what the dealer is looking at when you bring the engine in, which often prevents dealers from over-quoting warranty-adjacent work. Everything outside factory warranty coverage including scheduled maintenance, repairs on out-of-warranty engines, and diagnostic work we handle directly.

Do you sell parts or just install them?

We stock common wear parts and consumables on the truck and source OEM parts through manufacturer parts networks as needed for specific jobs. We can also install customer-supplied parts and equipment (including chartplotters, trolling motors, and accessories) that you have purchased elsewhere, as long as the equipment is appropriate for the boat. We are not primarily a parts retailer, but we source what we need to complete the work.

Need a Marine Mechanic in North Port · Port Charlotte · Punta Gorda · Englewood · Venice · Placida?

Call or text (239) 333-6722 with your boat make, engine brand, and what you need done. We will confirm the service, quote the work, and schedule the visit as fast as possible.

Call (239) 333-6722 Send a Message